Extraction Grade™ Hydrocarbon Solvents (LPG) Specifications

Extraction Grade™ line of products is of professional caliber and free of harmful chemicals to human and animal life.  To meet the standard of extraction grade™, the products must serve to promote wellness while safeguarding both consumers and end-users, ensuring the certified products conform to maximum ethical standards set internationally.

Click here to buy Extraction Grade™ Hydrocarbon Solvents.

Extraction Grade™ hydrocarbon solvents are free of sulfur-based mercaptan odorants, colorless, clean, and more importantly non-detectable limitsof toxic BTEX compounds2 which are benzene, toluene, ethylbenzene, and xylene.
 
  Grades - SPECIFICATIONS
 

Commercial

HD-10

Engine Fuel-Grade

HD-5

Instrument / Refrigerant
R290, R600, R600a
Extraction
Grade™
Unit
Purity 90% 90% 99.50% 99.50% Mass%
Other Hydrocarbons 9% 4% 0.49% 0.49% Mass%
Propylene 10% 5% 0.01% ND Mass%
Total Sulfur 3 3 2 ND PPM
Benzene 2 1.6 1 (?) ND PPM
Toluene ? ? ? ND PPM
Ethylbenzene ? ? ? ND PPM
Xylene ? ? ? ND PPM
Methane 5% 5% 0.01% 0.01% Mass%
Ethane 2% 2% 0.05% 0.01% Mass%
Trans-2-Butene 2% 2% 0.01% 0.01% Mass%
1-Butene 2% 2% 0.01% 0.01% Mass%
cis-2Butene 2% 2% 0.01% 0.01% Mass%
n-Pentane 0.50% 0.50% 0.01% 0.01% Mass%
Neopentane 0.05% 0.05% 0.01% 0.01% Mass%
Isopentane 0.05% 0.05% 0.01% 0.01% Mass%
Other C5+ 0.10% 0.10% 0.01% 0.01% Mass%
             
ND: Not Detected.
PPM: Parts Per Million.

1Below minimum detection limit (MDL) of 0.5 PPM.

2BTEX compounds are classified by the EPA and FDA as Group A carcinogens or Group D carcinogens.  Compounds that may cause cancer or damage the central nervous system.

             

Note: Boiling point for Benzene is 176.2 F° (80.1 C°), Toluene is 231.1 F° (110.6 C°), Ethylbenzene is 278.6 F° (136 C°), and Xylene is 282.2 F° (139 C°)